Foldback; Support - Miller Millermatic 355 Owner's Manual

6-13. Foldback

6-14. Support

OM-288360 Page 54
When the screen shows the weld parame-
ters in RED, it indicates the machine is in a
foldback condition. Reduce the settings or
ON
change the input power from single phase
208/240 volts to single phase 460/575 volts
or any three phase input power.
OFF
The support screen allows the operator to
quickly access the Miller website and phone
number to obtain more product information
ON
or get service support.
Access the Support screen from the manual
MIG screen by pressing Set-up, then Sup-
port. See section 6–5.
OFF