Section 7 - Maintenance And Troubleshooting; Routine Maintenance - Miller Millermatic 355 Owner's Manual

SECTION 7 – MAINTENANCE AND TROUBLESHOOTING
SECTION 17
7-1.

Routine Maintenance

17-1. Routine Maintenance
Disconnect power before maintaining.
�
Maintain more often during severe conditions.
� = Check
Every 3
Months
1/2 in.
Every
(13 mm)
3
Months
� Damaged Or Unreadable
Labels
Every 6
Months
� Inside Unit
A complete Parts List is available at www.MillerWelds.com
MAINTENANCE & TROUBLESHOOTIN
◇ = Change
� Repair Or Replace Cracked Weld Cables
� Clean Drive Rolls
� = Clean
Replace Cracked
Torch Body
� = Replace
Repair Or Replace
Cracked Cables And
Cords
Clean
And
Tighten Weld
Connections
OM-249336 Page 1
OM-288360 Page 55
OM-231242 P