Chapter 1
1. 2. 1.
You can check the extender's working status by following the LED Explanation table.
1. 2. 2.
Ports or Buttons
ON/OFF Button
WPS Button
RESET Button
Ethernet Port
Downloaded from
ManualsNet.com
LED Explanation
Name
Status
Green
Red
(Signal)
Off
On/Off
WPS
Flashing
On
Flashing
(Power)
Off
Port and Button Description
To turn on or off the extender, press the ON/OFF button.
Press the WPS button on your host router, and immediately press the WPS
button on the extender. The WPS LED of the extender should change from
flashing to solid on, indicating successful WPS connection.
With the extender powered on, press and hold the RESET button until all the
LEDs turn on momentarily. Then release the button.
Connect your Ethernet-only device to the Ethernet port of the extender to join
the Wi-Fi network.
search engine
Indication
The extender is connected to your router's wireless network
and is in a suitable location.
The extender is experiencing poor signal strength. Try
relocating it closer to your router.
No wireless connection is established.
The light remains on for 5 minutes when a WPS connection is
established, then turns off.
WPS connection is being established.
The extender is on.
The extender is starting up.
The extender is off.
Description
Get to Know About Your Extender
4