For 72-inch decks, install the bumpers to the 2 inside holes
of the toeboard
(Figure
36).
Figure 36
1. Locknut (5/16 inch)
2. Spacer
14
Adjusting the Parking Brake
No Parts Required
Procedure
Make sure that the brake is adjusted properly; refer to the
Operator's Manual for the machine.
3. Bumper
15
Checking the Tire Pressure
No Parts Required
Procedure
Note: Increase the tire pressure due to the additional weight.
Check and increase the air pressure in the front caster wheels
and therear tires
(Figure
Pressure: Rear tires: 138 kPa (20 psi)
Front caster wheels: 172 kPa (25 psi)
22
37).
Figure 37