Maintenance; Recommended Maintenance Schedule(S); Cleaning The Bagger Screen; Cleaning The Collection System - Toro E-Z Vac 78566 Operator's Manual

48in, 52in, 60in or 72in dfs collection system
Table of Contents

Advertisement

Maintenance

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 8 hours
After the first 100 hours
Before each use or daily
Every 25 hours
Every 50 hours
Every 100 hours

Cleaning the Bagger Screen

Service Interval: Before each use or daily
Clean the screen before each use (more often in wet grass).
1. Disengage the power take off (PTO) and set the
parking brake.
2. Turn off the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position.
3. Open the bagger.
4. Clean the debris from the screen.
5. Close the bagger.
Maintenance Procedure
• Inspect the blower belt.
• Inspect the collection system.
• Adjust the parking brake (also when replacing or removing a brake component).
• Clean the hood screen.
• Clean the collection system.
• Inspect the blower belt.
• Grease the idler arm.
• Grease the handle pivot.
• Inspect the collection system.
Cleaning the Collection
System
Service Interval: Before each use or daily
1. Wash the inside and outside of the bagger hood, tube,
and the underside of the mower. Use a mild automotive
detergent to remove dirt.
2. Make sure you remove matted grass from all parts.
3. After washing all parts, let them dry thoroughly.
Note: With all parts installed, start and run the machine for
a minute to assist in drying.
27

Advertisement

Table of Contents
loading

This manual is also suitable for:

E-z vac 78567E-z vac 78568

Table of Contents