Installing The Muffler Deflector - Toro E-Z Vac 78566 Operator's Manual

Figure 11
1. Bagger-arm assembly
2. Bagger-handle linkage
3. Clevis-pin spring
4. Yoke
7

Installing the Muffler Deflector

Parts needed for this procedure:
1 Muffler deflector
2 Flange nut (small flange–3/8 inch)
2 Carriage bolt (3/8 x 1-1/4 inches)
Procedure
Install the muffler deflector to the side of the bagger frame
(Figure 12).
Note: Ensure that the muffler deflector is positioned over
the tail pipe on the muffler.
60- and 72-inch bagger shown
1. Muffler deflector
2. Flange nut (small
flange–3/8 inch)
12
Figure 12
3. Carriage bolt (3/8 x 1-1/4
inches)