Installing The Bumpers - Toro E-Z Vac 78566 Operator's Manual

6. Secure the front weights on top of the foot rest and to
the weight-mount bracket with 6 bolts (3/8 x 1 inch),
6 lock washers (3/8 inch), 3 flange nuts (small flange)
(3/8 inch) and 6 flat washers (3/8 inch)
Figure 33
1. Front weight
2. Flat washer (3/8 inch)
3. Lock washer (3/8 inch)
Figure 34
1. Weight-mount bracket
2. Flat washer (3/8 inch)
(Figure 33).
4. Bolt (3/8 x 1 inch)
5. Hole in footrest
6. Flange nut (small
flange–3/8 inch)
3. Lock washer (3/8 inch)
4. Bolt (3/8 x 1 inch)
13

Installing the Bumpers

Machines with MyRide™ Suspension
System
Parts needed for this procedure:
2 Bumper
2 Spacer
2 Locknut (5/16 inch)
Procedure
For 48-inch, 52-inch, and 60-inch decks, install the bumpers
to the 2 outside holes of the toeboard
1. Locknut (5/16 inch)
2. Spacer
21
(Figure 35).
Figure 35
3. Bumper