7. Install the lower tube into the upper tube
Figure 24
1. Lower tube
8. Slide the lower tube onto the boot and latch them
together
(Figure 25
or
Note: There is a latch on the top and bottom of the
blower housing.
Note: Make sure that the mower deck is in the lowest
height-of-cut position and the mark on the upper tube
is still positioned against the protruding rubber seal.
Make sure that the mark from
(Figure
2. Upper tube
Figure
26).
Figure 23
is still in place.
24).
1. Blower assembly
2. Lower tube
17
Figure 25
3. Latch