Toro E-Z Vac 78566 Operator's Manual page 15

48in, 52in, 60in or 72in dfs collection system

Table of Contents

3. Close the blower assembly to see if the latches are

adjusted correctly

(Figure

Note: Loosen or tighten the bolt so the latches firmly

hold the blower assembly against the mower deck but

can be released by hand

Figure 18

1. Latch

2. Bolt

4. Install the spring as shown in

Note: Make sure that the hooks are in the correct

position.

Figure 19

1. Spring-loaded idler pulley

2. Short-hook end

18).

3. Blower assembly

Figure

19.

3. Long-hook end

5. Pull the spring-loaded idler pulley back and route the

belt around the mower-deck pulley

Note: Ensure that the belt is routed around the blower

pulleys correctly

1. Mower-deck pulley

2. Spring-loaded Idler pulley

(Figure

20).

Figure 20

3. Blower

Table of Contents

E-z vac 78567 E-z vac 78568