nuts (3/8 inch) and 6 flat washers (3/8 inch) as
shown in
Figure
35.
Figure 35
1. Front weight
2. Flat washer (3/8 inch)
3. Lock washer (3/8 inch)
Figure 36
1. Weight-mount bracket
2. Flat washer (3/8 inch)
g009227
4. Bolt (3/8 x 1 inch)
5. Hole in footrest
6. Flange nut (3/8 inch)
g009225
3. Lock washer (3/8 inch)
4. Bolt (3/8 x 1 inch)
11
Installing the Bumpers
Machines with MyRide™
Suspension System
Parts needed for this procedure:
2
Bumper
2
Spacer
2
Locknut (5/16 inch)
Procedure
For 48-inch, 52-inch, 60-inch, and 72-inch
decks (serial number 406294345 and above), install
the bumpers to the 2 outside holes of the toeboard
(Figure
37).
1. Locknut
2. Spacer
For 72-inch decks (serial number 406294344 and
below), install the bumpers to the 2 inside holes of
the toeboard
(Figure
21
Figure 37
3. Bumper
38).
g030506