Table of Contents
Advertisement
Super X13DEG-M User's Manual
DIMM Installation
Note: The DDR5 DIMM module is NOT
hot-swappable and be sure to disconnect power for
a minimum of
ing it.
1. Insert the desired number of DIMMs into the memory
slots based on the recommended DIMM population
tables in the previous section. Locate DIMM memory
slots on the motherboard as shown on the right.
2. Push the release tabs outwards on both ends of the DIMM slot to unlock it.
3. Align the key of the memory module with the DIMM socket key on the memory slot.
4. Align the notches on both ends of the module against the latches on the ends of the
slot.
5. Push both ends of the module straight down into the slot until the module snaps into
place.
6. Press the release tabs to the lock positions to secure the memory module into the slot.
20 seconds
before inserting or remov-
Release Tabs
Key
Push both ends
straight down into
the memory slot.
64
EJSW_3
P54V_JPWR1
JSWID2
JSWID1
BT1
EJNVME1
JNCSI1
EJ21
JRK1
JL1
JNVI2C1
JNVVPP1
JPWR4
FAN1
Notches
EJSW_7
EJSW_8
EJSW_9
EJSW_10
JSW1
EJSW_4
EJSW_5
EJSW_6
EJNIC1
EJNIC2
EJNIC3
EJSW_PWR2
EJNIC4
EJNIC5
EJNIC6
JPWR3
PLX
PLX
PLX
PLX
BMC
Switch 1
Switch 2
Switch 3
Switch 4
LEDBMC
JS1
JS2
PCH
JMCIO1A JMCIO1B
JMCIO2A JMCIO2B
EJNVME2
EJNVME3
EJNVME4
JBT1
BAR CODE
X13DEG-M
BIOS LICENSE
MAC CODE
REV:1.01
DESIGNED IN USA
CPU1
CPU2
LED7 (TOP)
LED4 (BOTTOM)
ALWAYS POPULATE BLUE SOCKET FIRST
FST_110
FST_80
JM2_D
JPWR5
FAN2
FAN3
FAN4
12V
JSSW2
JTPM1
JFP2
Advertisement
Table of Contents
