Table of Contents
Advertisement
Super X13DEG-M User's Manual
4-pin BMC External I
A System Management Bus header for the BMC is located at JIPMB1. Connect the appropriate
cable here to use the IPMB I
of JIPMB1.
NC-SI Connector
The NC-SI (Network Controller Sideband Interface) connector is located at (JNCSI1). This
connector is used to connect a Network Interface Card (NIC) to the motherboard to allow the
onboard BMC (Baseboard Controller) to communicate with a network.
Note: For detailed instructions on how to configure Network Interface Card (NIC) set-
tings, please refer to the Network Interface Card Configuration User's Guide posted on
the web page under the link:
EJSW_3
EJSW_4
EJSW_5
EJSW_6
P54V_JPWR1
PLX
Switch 1
JSWID2
JSWID1
BT1
JMCIO1A JMCIO1B
EJNVME1
EJNVME2
2
JNCSI1
CPU1
1
EJ21
JRK1
JL1
JNVI2C1
LED7 (TOP)
JNVVPP1
JM2_D
JPWR4
FAN1
C Header
2
C connection on your system. Refer to the layout for the location
2
https://www.supermicro.com/support/manuals/.
EJSW_7
EJNIC1
EJNIC2
EJNIC3
EJSW_PWR2
EJNIC4
EJNIC5
EJNIC6
PLX
PLX
PLX
Switch 2
Switch 3
Switch 4
JMCIO2A JMCIO2B
EJNVME3
EJNVME4
BAR CODE
X13DEG-M
BIOS LICENSE
MAC CODE
REV:1.01
DESIGNED IN USA
CPU2
LED4 (BOTTOM)
ALWAYS POPULATE BLUE SOCKET FIRST
FST_110
FST_80
FAN2
FAN3
1. BMC External Header (JIPMB1)
EJSW_8
EJSW_9
EJSW_10
JSW1
2. NC-SI Connector (JNCSI1)
12V
JPWR3
BMC
LEDBMC
JS1
JS2
JSSW2
PCH
JTPM1
JBT1
JFP2
JPWR5
FAN4
74
Advertisement
Table of Contents
