Table of Contents
Advertisement
Chapter 4: UEFI BIOS
KMS Time Out
Use this feature to set the KMS server connecting timeout (in seconds). The default setting
is 5 (seconds).
TimeZone
Use this feature to set the correct time zone. The default setting is 0 (not specified).
Client UserName
Press <Enter> to set the client identity (UserName). The maximum length is 63 characters.
Client Password
Press <Enter> to set the client identity (Password). The maximum length is 31 characters.
CA Certificate/ Client Certificate/ Client Private Key
Use the three features to enroll factory defaults or load the KMS Transport Layer Security
(TLS) certificates, which are generated by the KMS Server, from the file stored in the USB
flash drive as shown below.
Private Key Password (Available when "Client Private Key" above has been set)
Use this feature to change the private key password.
135
Advertisement
Table of Contents
