Table of Contents
Advertisement
Local IP Address (Available when "Configured" is set to Enabled and "Enabled
DHCP" is set to Disabled)
Use this feature to enter an IP address for the local machine.
Local NetMask (Available when "Configured" is set to Enabled and "Enabled
DHCP" is set to Disabled)
Use this feature to set the netmask for the local machine.
Local Gateway (Available when "Configured" is set to Enabled and "Enabled
DHCP" is set to Disabled)
Use this feature to set the gateway address for the local machine.
Local DNS Servers (Available when "Configured" is set to Enabled and "Enabled
DHCP" is set to Disabled)
Use this feature to set the Domain Name System (DNS) server address for the local
machine.
Save Changes and Exit
Press <Enter> to save changes and exit. The options are Yes and No.
PCIe/PCI/PnP Configuration
The following information is displayed:
•
PCI Bus Driver Version
PCI Devices Common Settings:
Above 4G Decoding (Available when the system supports 64-bit PCI decoding)
Select Enabled to decode a PCI device that supports 64-bit in the space above 4G Address.
The options are Disabled and Enabled.
MMCFG Base
This feature determines how the lowest Memory Mapped Configuration (MMCFG) base is
assigned to onboard PCI devices. The options are 1G, 1.5G, 1.75G, 2G, 2.25G, 3G, and Auto.
MMCFG Size
Use this feature to set the MMCFG size. The options are 128M, 256M, 512M, 1G, 2G, and
Auto. Please note that the MMCFG size is based on the memory populated.
Note: The options shown here depend on your memory size.
MMIO High Base
Use this feature to select the base memory size according to memory-address mapping for
the IO hub. The options are 56T, 40T, 32T, 24T, 16T, 4T, 2T, 1T, 512G, and 3584T.
131
Chapter 4: UEFI BIOS
Advertisement
Table of Contents
