Getting Started; Preparation Before First Use - KitchenAid KES6551 Product Manual

GETTING STARTED

PREPARATION BEFORE FIRST USE

Remove and discard all labeling and packaging materials attached to your Semi-Automatic
Espresso Machine. Ensure you have removed all parts and accessories before discarding the
packaging.
Remove the Water Tank located at the back of the Semi-Automatic Espresso Machine by lifting
the Water Tank handle. Locate the plastic bag containing the Water Filter and
Water Filter Holder. Clean parts and accessories (Water Tank, Portafilter, Filter Baskets,
Milk Pitcher) using warm water and a gentle dish washing liquid, then rinse and dry thoroughly.
Wipe the outer housing, Bean Hopper, and Drip Tray with a soft damp cloth and dry thoroughly.
Do not immerse the outer housing or power cord in water or any other liquid.
Place the Semi-Automatic Espresso Machine on a dry, flat, level surface such as a countertop
or table.
PRIMING PUMP INSTRUCTIONS
Recommended for first time use and if the Semi-Automatic Espresso Machine has not been
used for long periods of time.
Remove and discard the red plastic seal used for shipping, located at the Water Tank base.
NOTE: The Priming Pump is a clear plastic injector that can be found inside the accessory
box.
1.
Press the Priming Pump as shown in the figure.
2.
Dip the tip of the Priming Pump in a reservoir of water to fill it.
8