Communication; Network - Fronius Primo GEN24 208-240 Operating Instructions Manual

Communication

Network

Server addresses for data transfer
If a firewall is used for outgoing connections, the following protocols, server ad-
dresses and ports must be allowed for successful data transfer:
-
-
-
-
-
-
-
-
-
When using FRITZ!Box products, the Internet access must be configured to be
unlimited and unrestricted. The DHCP Lease Time (validity) must not be set to 0
(=infinite).
LAN:
Establishing a connection:
1
2
3
4
The connection is established. After connecting, the status of the connection
should be checked (see chapter
WLAN:
Establishing a connection via WPS:
1
2
The connection is established automatically. After connecting, the status of the
connection should be checked (see chapter
Selecting and connecting to a WLAN network:
The networks found are shown in the list. Clicking on the refresh button
carry out a second search of the available WLAN networks. The
input field can be used to further restrict the selection list.
1
2
82
Tcp fronius-se-iot.azure-devices.net:8883
Tcp fronius-se-iot-telemetry.azure-devices.net:8883
Tcp fronius-se-iot-telemetry.azure-devices.net:443
Udp sera-gen24.fronius.com:1194 (213.33.117.120:1194)
Tcp cure-se.fronius.com:443
Tcp firmware-download.fronius.com:443
Tcp froniusseiot.blob.core.windows.net:443
Tcp provisioning.solarweb.com:443
Upd/Tcp 0.time.fronius.com:123
Enter host name.
Select connection type
For connection type "static"
way.
Click on the "Connect"
Click the "Enable" button.
Activate WPS on the WLAN router (see documentation provided with the
WLAN router).
Select network from the list.
Select connection type
"automatic" or "static".
- enter IP address, subnet mask, DNS and gate-
button.
"Internet services" on page 85).
"Internet
"automatic" or "static".
services" on page 85).
will
"Find network"