Fronius Primo GEN24 208-240 Operating Instructions Manual page 62

7
8
9
62
L1´ Phase conductor
N´ Neutral conductor
N´ Ground conductor
NOTE!
The ground conductor must be pro-
duced with ends that are permanently
marked blue, according to the national
provisions, and have a cross-section of
AWG 6.
Fasten the ground conductor and PEN
conductor to the ground electrode ter-
minal using a screwdriver (TX20) and a
torque of 1.47 ft-lbs / 2 Nm.
Insert the OP terminal into the OP slot
until it engages.