Fronius Primo GEN24 208-240 Operating Instructions Manual page 58

7
8
9
58
Use a suitable measuring instrument
to check the voltage and polarity of
the DC cabling. Remove both DC ter-
minals from the slots.
CAUTION!
Danger due to polarity reversal at the
terminals.
This may result in severe damage to
the inverter.
▶
Use a suitable measuring instru-
ment to check the polarity of the
DC cabling.
▶
Use a suitable measuring instru-
ment to check the voltage (max.
600 V )
DC
Insert the DC terminals into the re-
spective slot until they engage.