Routing Data Communication Cables; Terminating Resistors - Fronius Primo GEN24 208-240 Operating Instructions Manual

Routing data
1
communication
cables
2
3
Terminating res- It may be possible for the system to function without terminating resistors.
istors However, owing to interference, the use of terminating resistors according to the
following overview is recommended for trouble-free operation.
For permissible cables and max. distances for the data communication area,
refer to the chapter headed
nection
IMPORTANT!Terminating resistors that are not positioned as illustrated can res-
ult in interference in the data communication.
64
Insert the conduit into the hole and fasten it using the torque specified by
the manufacturer. Seal the conduit as per the chapter headed
knockouts for connection
on page 46.
Drill out the knockout with a step drill.
on page 41.
Run the data communication cables
through the electrical installation tube
from below.
Permitted cables for the data communication con-
Preparing