Original installa�on and opera�on manual
9.4.5
WARNING status
The WARNING is an anomalous event related to a malfunction of the device. The WARNING does not
compromise the functioning of the device and the safety of operators.
NOTE
INFORMATION
68 | 120
WARNING status
With the device in WARNING status the compressed air treatment may be
improper.
•
Call immediately the maintenance personnel if one or more WARNINGS are de-
tected.
•
Maintenance personnel will refer to section "16 Troubleshooting" on page 105.
Behaviour of the device in presence of a WARNING
•
With the device stopped:
The triggering of one or more WARNINGS is not shown on the User
Interface.
With one or more active WARNINGS is always possible to start the
device.
•
After the starting command:
The device starts.
The notification area of User Interface changes colour to orange and
flashes.
WARNING code and text are shown on the notification area.
In case of more active WARNINGS, they are shown cyclically.
•
With the device in normal running status:
The device remain in normal running status.
The notification area of User Interface changes colour to orange and
flashes.
WARNING code and text are shown on the notification area.
In case of more active WARNINGS, they are shown cyclically.
•
Exceptions:
WARNING W11 appears and automatically clears without any user
clearing action, with device stopped also.
WARNING W5 appears and automatically clears by factory setting. It
can be set to be cleared with the user clearing action.
WARNING W2 doesn't stop the dryer by factory setting. It can be set:
o to prevent the starting of the device, if stopped.
o to stop the device, if started.
DRYPOINT
®
RA III