Table of Contents
Advertisement
DRYPOINT
®
RA III
16.1.2 Clearing an ALARM
Illustration
Original installa�on and opera�on manual
Description / explanation
1. Refer to the section "9.4.6 ALARM
status " on page 70.
2. Fix the cause which has triggered the
ALARM.
3. The notification area of User Interface
stops flashing and turns permanently red.
4. Touch the notification area to access the
list of all stored ALARMS.
5. Touch the red area with the ALARM to be
cleared.
6. Confirm the operation pressing the
CONFIRM button [2] or abort the
command pressing the EXIT button [1].
109 | 120
Advertisement
Table of Contents
