Beko DRYPOINT RA III 1080 Translation Of Original Installation And Operation Manual page 65

DRYPOINT ® RA III
Pos. No.
Description / explanation
[4] T1 – Dew point temperature.
[5] T2 – Temperature of air at inlet side of
heat exchanger.
T3 – Temperature of refrigerant fluid
[6]
at suction side of compressor.
T4 – Temperature of refrigerant fluid
[7]
at discharge side of compressor.
[8]
T5 – Ambient temperature.
[9] LP – Pressure of refrigerant fluid at
suction side of compressor.
The User Interface shows the actual process values and related function buttons.
CONDENSATE DRAIN TEST button
Press and hold the CONDENSATE DRAIN TEST button [13] to perform the condensate drain test, release
the button to stop the test
PROCESS VALUES HISTORY button
Press the PROCESS VALUES HISTORY button [14] to access the process values history screen.
DATA RECORDING button
Press the DATA RECORDING button [15] to access the data recording screen.
Illustration
Pos. No.
Description / explanation
Original installa�on and opera�on manual
Description / explanation
[10] HP – Pressure of refrigerant fluid
at discharge side of compressor.
[11] Opening percentage of hot gas
by-pass valve, models RA 2400 /
3000.
[12] Fan speed percentage, models
RA 2400 / 3000.
[13] CONDENSATE DRAIN TEST
button
[14] PROCESS VALUES HISTORY
button
[15] DATA RECORDING button
65 | 120