Safety; Use; Intended Use - Beko DRYPOINT RA III 1080 Translation Of Original Installation And Operation Manual

Original installa�on and opera�on manual

2. Safety

2.1

Use

2.1.1

Intended use

The DRYPOINT RA III, also termed product / device in the following, is a compressed-air refrigeration dryer
®
used to separate the moisture in the compressed air, where the compressed air does not treat foodstuffs and
is not used for breathing purposes.
The product is intended only for the separation of moisture in compressed air. Any use of this product other
than the use described in this manual is hereby deemed to be non-intended and can cause a hazard for the
safety of people and the environment.
The following must be noted for intended use:
•
Read and follow the manual.
•
Only use the product and accessories within the operating parameters given in the technical data and
the agreed delivery conditions.
•
Only use the product and accessories with media which are free of caustic, aggressive, corrosive,
toxic, flammable, oxidising or inorganic components.
out.
•
Only use the product and accessories in areas which are free of toxic and corrosive chemicals and
gases.
•
Only use the product and accessories within piping system designed for the technical data with
appropriate connections, pipe diameters and assembly clearances.
•
Only use the product and accessories outside potentially explosive atmospheres.
•
Only use the product and accessories away from direct solar radiation and heat sources as well as
areas subject to frost.
•
Only combine the product and accessories with the products and components named and
recommended by BEKO TECHNOLOGIES in the manual.
•
Adhere to the prescribed maintenance schedules.
Before using the product and the accessories, the operating company must make sure that all conditions and
prerequisites for intended use are given.
The product and the accessories have been exclusively designed for stationary use in a commercial or
industrial area. All of the assembly, installation, operation, maintenance, disassembly and disposal work
described may only be performed by qualified skilled technical personnel.
8 | 120
In cases of doubt an analysis must be carried
DRYPOINT ® RA III