Technical Specifications; Technical Support - Baileigh Industrial 3-IN-1 Operator's Manual

TECHNICAL SPECIFICATIONS

Bed Width
Shear Capacity
Bending Capacity
Rolling Capacity
Maximum Bend Angle
Slip Roll Solid Rod Sizes
Minimum Roll Diameter
Box Depth
Frame and Base
Brake
Shear Table
Shear Blades
Shear Hold-Down Clamp
Diameter of Rolls
Power Requirements
Shipping Dimensions (L x W x H)
Shipping Weight
Based on a material tensile strength of *64000 PSI – mild steel
**100000 PSI – stainless steel

TECHNICAL SUPPORT

Our technical support department can be reached at 920.684.4990 and asking for the support
desk for purchased machines. Tech Support handles questions on machine setup, schematics,
warranty issues, and individual parts needs: (other than die sets and blades).
For specific application needs or future machine purchases contact the Sales Department at:
sales@baileigh.com, Phone: 920.684.4990, or Fax: 920.684.3944.
Note: The photos and illustrations used in this manual are representative only and
may not depict the actual color, labeling or accessories and may be intended to illustrate
technique only.
Note: The specifications and dimensions presented here are subject to change
without prior notice due to improvements of our products.
40" (1016mm)
20ga. (.912mm) mild steel*
20ga. (.912mm) mild steel*
20ga. (.912mm) mild steel*
90°
.187" (4.76mm) diameter,
.250" (6.35mm) diameter,
.312" (7.92mm) diameter
1.70" (43.2mm)
4" (101.6mm)
Cast Iron
Ground Steel w/Hardened Edge
Precision Ground Cast Iron
Hardened Steel (Can be turned four times)
Spring-Loaded Cast Iron
1.70" (43.2mm)
Manual
53" x 18" x 27" (1346 x 457 x 686mm)
467 lbs. (212 kg)
9
9