Table of Contents
Advertisement
Quick Links
OPERATOR'S MANUAL
TUBE AND PIPE NOTCHER
MODEL: TN-250
Baileigh Industrial, Inc.
P.O. Box 531
Manitowoc, WI 54221-0531
Phone: 920.684.4990
Fax: 920.684.3944
sales@baileighindustrial.com
REPRODUCTION OF THIS MANUAL IN ANY FORM WITHOUT WRITTEN APPROVAL OF BAILEIGH INDUSTRIAL, INC.
IS PROHIBITED. Baileigh Industrial, Inc. does not assume and hereby disclaims any liability for any damage or loss
caused by an omission or error in this Operator's Manual, resulting from accident, negligence, or other occurrence.
Rev. 06/2015
© 2015 Baileigh Industrial, Inc.
Advertisement
Table of Contents
Related Manuals for Baileigh Industrial TN-250
Summary of Contents for Baileigh Industrial TN-250
- Page 1 REPRODUCTION OF THIS MANUAL IN ANY FORM WITHOUT WRITTEN APPROVAL OF BAILEIGH INDUSTRIAL, INC. IS PROHIBITED. Baileigh Industrial, Inc. does not assume and hereby disclaims any liability for any damage or loss caused by an omission or error in this Operator’s Manual, resulting from accident, negligence, or other occurrence.
-
Page 2: Table Of Contents
Table of Contents THANK YOU & WARRANTY ..................1 INTRODUCTION ......................3 GENERAL NOTES ......................3 SAFETY INSTRUCTIONS ....................4 SAFETY PRECAUTIONS ....................6 TECHNICAL SPECIFICATIONS ..................8 TECHNICAL SUPPORT ....................8 UNPACKING AND CHECKING CONTENTS ..............9 Cleaning ........................9 INSTALLATION ...................... -
Page 3: Thank You & Warranty
THANK YOU & WARRANTY Thank you for your purchase of a machine from Baileigh Industrial. We hope that you find it productive and useful to you for a long time to come. Inspection & Acceptance. Buyer shall inspect all Goods within ten (10) days after receipt thereof. Buyer’s payment shall constitute final acceptance of the Goods and shall act as a waiver of the Buyer’s rights to inspect or... - Page 4 • A 30% re-stocking fee applies to all returns. Baileigh Industrial makes every effort to ensure that our posted specifications, images, pricing and product availability are as correct and timely as possible. We apologize for any discrepancies that may occur. Baileigh Industrial reserves the right to make any and all changes deemed necessary in the course of business including but not limited to pricing, product specifications, quantities, and product availability.
-
Page 5: Introduction
After receiving your equipment remove the protective container. Do a complete visual inspection, and if damage is noted, photograph it for insurance claims and contact your carrier at once, requesting inspection. Also contact Baileigh Industrial and inform them of the unexpected occurrence. Temporarily suspend installation. -
Page 6: Safety Instructions
IMPORTANT PLEASE READ THIS OPERATORS MANUAL CAREFULLY It contains important safety information, instructions, and necessary operating procedures. The continual observance of these procedures will help increase your production and extend the life of the equipment. SAFETY INSTRUCTIONS LEARN TO RECOGNIZE SAFETY INFORMATION This is the safety alert symbol. - Page 7 SAVE THESE INSTRUCTIONS. Refer to them often and use them to instruct others. PROTECT EYES Wear safety glasses or suitable eye protection when working on or around machinery. PROTECT AGAINST NOISE Prolonged exposure to loud noise can cause impairment or loss of hearing.
-
Page 8: Safety Precautions
SAFETY PRECAUTIONS Metal working can be dangerous if safe and proper operating procedures are not followed. As with all machinery, there are certain hazards involved with the operation of the product. Using the machine with respect and caution will considerably lessen the possibility of personal injury. However, if normal safety precautions are overlooked or ignored, personal injury to the operator may result. - Page 9 11. Do not overreach. Maintain proper footing and balance at all times. DO NOT reach over or across a running machine. 12. Stay alert. Watch what you are doing and use common sense. DO NOT operate any tool or machine when you are tired. 13.
-
Page 10: Technical Specifications
TECHNICAL SPECIFICATIONS TN-250 Imperial Metric 0.5” – 2.5” 12.7mm – 63.5mm Notching Capacity (OD) Angle Adjustment Infinite 1/2” (12.7mm) Powered Hand Drill Power Requirements 24” x 12” x 12” Shipping Dimensions 610mm x 305mm x 305mm Shipping Weight 50 lbs. -
Page 11: Unpacking And Checking Contents
UNPACKING AND CHECKING CONTENTS Your Baileigh machine is shipped complete in one package. Separate all parts from the packing material and check each item carefully. Make certain all items are accounted for before discarding any packing material. WARNING: SUFFOCATION HAZARD! Immediately discard any plastic bags and packing materials to eliminate choking and suffocation hazards to children and animals. -
Page 12: Installation
INSTALLATION IMPORTANT: Consider the following when looking for a suitable location to place the machine: • Overall weight of the machine. • Weight of material being processed. • Sizes of material to be processed through the machine. • Space needed for auxiliary stands, work tables, or other machinery. •... -
Page 13: Assembly And Set Up
ASSEMBLY AND SET UP WARNING: For your own safety, DO NOT connect a powered drill until the machine is completely assembled and you have read and understand the entire instruction manual. 1. Install the hand wheel onto the hub with the supplied 5/16-18 socket head screws. -
Page 14: Operation
1. Operating your TN-250 is very easy, but certain steps need to be followed. 2. After your notcher is assembled, it needs to be clamped into a vise or bolted to the side of a workbench. -
Page 15: Arbor Adapters
• Angle notches over 45 degrees should be sawed to the angle first, to remove the majority of the material. • Following these simple steps will give you years of trouble free service from your TN-250 notcher. Arbor Adapters When setting up the notcher, use the correct arbor to saw adapter to fit the size and manufacturer of the hole saw being used. -
Page 16: Material Selection
MATERIAL SELECTION CAUTION: It must be determined by the customer that materials being processed through the machine are NOT potentially hazardous to operator or personnel working nearby. When selecting materials keep these instructions in mind: • Material must be clean and dry. (without oil) •... -
Page 17: Parts Identification Drawing
PARTS IDENTIFICATION DRAWING... -
Page 19: Parts Identification List
Parts Identification List Item Part Number Description Qty. ME-TN250-6A016 MAIN FRAME ME-TN250-6A009 ACTUATOR PLATE ME-TN250-6A011 PIVOT CLAMP BLOCK ME-TN250-6A015 ROCKER BLOCK ME-TN250-6A021 GRIPPER JAW TN250-7A014 SPACER ME-TN250-5A001 PIVOT ARM ASSY ME-TN250-6A013 BRG BLOCK TN250-7A001 SAW ARBOR TN250-6A017 DEGREE DISC TN250-7A007 TRUNION TN250-7A006 VISE SCREW... - Page 20 Item Part Number Description Qty. PP-0196 0.5 ID X 0.625 OD X 0.562 LG PP-1141 NEEDLE BEARING BAILEIGH INDUSTRIAL, INC. 1625 D , WI 54220 UFEK RIVE ANITOWOC : 920. 684. 4990 F : 920. 684. 3944 HONE www.baileigh.com BAILEIGH INDUSTRIAL LTD. U...