Table of Contents
Advertisement
TECHNICAL SPECIFICATIONS
Maximum Capacity
Hydraulic System Pressure
Moveable Cylinder
Working Width
Cylinder Stroke
Cylinder Diameter
Piston Rod Diameter
Piston Head Diameter
Working Range
Power Requirement
Air Fitting
Air Pressure
Shipping Weight
Shipping Dimensions
TECHNICAL SUPPORT
Our technical support department can be reached at 920.684.4990 and asking for the support
desk for purchased machines. Tech Support handles questions on machine setup, schematics,
warranty issues, and individual parts needs: (other than die sets and blades).
For specific application needs or future machine purchases contact the Sales Department at:
sales@baileigh.com, Phone: 920.684.4990, or Fax: 920.684.3944.
Note: The photos and illustrations used in this manual are representative only and
may not depict the actual color, labeling or accessories and may be intended to illustrate
technique only.
Note: The specifications and dimensions presented here are subject to change
without prior notice due to improvements of our products.
50 ton (45 ton)
9053psi. (62.42MPa)
Yes
28.5" (724mm)
7.8" (200mm)
6" (152mm)
2" (50.8mm)
2.75" (70mm)
2.4" ~ 41" (62 ~ 1042mm)
Pneumatic/Manual
¼"NPT
107 ~ 124psi. (.75 ~ .85MPa)
803lbs (365kgs)
84" x 39" x 16" (2134 x 991 x 407mm)
9
9
Advertisement
Table of Contents
