Table of Contents
Advertisement
TECHNICAL SPECIFICATIONS
Bed Width
Shear Capacity
Bending Capacity
Rolling Capacity
Maximum Bend Angle
Slip Roll Solid Rod Sizes
Minimum Roll Diameter
Box Depth
Frame and Base
Brake
Shear Table
Shear Blades
Shear Hold-Down Clamp
Diameter of Rolls
Power Requirements
Shipping Dimensions (L x W x H)
Shipping Weight
Based on a material tensile strength of *64000 PSI – mild steel
TECHNICAL SUPPORT
Our technical support department can be reached at sales@baileighindustrial.com.au listing
support and the model number in the subject line. Tech Support handles questions on machine
setup, schematics, warranty issues, and individual parts needs: (other than die sets and blades).
List the model number, serial number and contact name and phone number as well as a brief
description of the nature of the contact in the body of the message.
For specific application needs or future machine purchases contact the Sales Department at:
phone: 61.383.743.888 or email: sales@baileighindustrial.com.au.
Note: The photos and illustrations used in this manual are representative only and
may not depict the actual color, labeling or accessories and may be intended to illustrate
technique only.
Note: The specifications and dimensions presented here are subject to change
without prior notice due to improvements of our products.
52" (1321mm)
16ga. (1.90mm) mild steel*
16ga. (1.90mm) mild steel*
16ga. (1.90mm) mild steel*
90°
.250" (6.35mm) diameter,
.312" (7.92mm) diameter,
.375" (9.52mm) diameter
2.38" (60.5mm)
4" (101.6mm)
Cast Iron
Ground Steel w/Hardened Edge
Precision Ground Cast Iron
Hardened Steel (Can be turned four times)
Spring-Loaded Cast Iron
2.38" (60.5mm)
Manual
67" x 30" x 46" (1702 x 762 x 1168mm)
1200 lbs. (545 kg)
11
11
Advertisement
Table of Contents
