TECHNICAL SPECIFICATIONS
Table Size
Table Height
Fence Boards
Insert Opening Diameters
Spindle Size
Spindle-2 Speed
Capacity Under Nut
Spindle Travel
Spindle Travel per Handwheel Rotation
Dust Port
Miter Slots
Router Collet
Power Transfer
Power Supply
Main Motor
Switch
Overall Dimensions (D x W x H)
Shipping Dimensions (D x W x H)
Net Weight
Shipping Weight
TECHNICAL SUPPORT
Our technical support department can be reached at 920.684.4990 and asking for the support
desk for purchased machines. Tech Support handles questions on machine setup, schematics,
warranty issues, and individual parts needs: (other than die sets and blades).
For specific application needs or future machine purchases contact the Sales Department at:
Baileigh-Sales@jpwindustries.com, Phone: 920.684.4990, or Fax: 920.684.3944.
Note: The photos and illustrations used in this manual are representative only and
may not depict the actual color, labeling or accessories and may be intended to illustrate
technique only.
Note: The specifications and dimensions presented here are subject to change
without prior notice due to improvements of our products.
27" x 25" (686 x 635mm)
33.5" (850mm)
11" x 3" (280 x 76mm)
3", 3.5", 7" (76, 89, 177mm)
1/2" and 3/4" (12.7 and 19.05mm)
8000/10000 RPM @ 60HZ
3" (76mm)
3.1" (80mm)
360º = 0.05" (1.4mm)
4" (101mm)
3/4" x 3/8"
1/4" & 1/2" (6.35 & 12.7mm)
V-Belt – K-23
220V 1ph, 60hz
3hp (2.23kw), 220V 1ph, 60hz, 16A
Magnetic On/Off and Reverse Switch
27" x 27.5" x 44.5" (686 x 699 x 1130mm)
48" x 45" x 45" (1220 x 1143 x 1143mm)
320lbs. (145kg)
353lbs. (160kg)
12
12