Kenwood CHP80 Instructions Manual page 11

Before plugging in
Make sure your electricity supply is the same as the one shown
on the underside of the power unit.
Important – Plug and Fuse Information
The wires in the cord are coloured as follows:
Blue = Neutral, Brown = Live.
If the plug is cut off it must be DESTROYED IMMEDIATELY. An
electric shock hazard may arise if an unwanted non-rewireable
plug is inadvertently inserted into a socket outlet.
If the plug supplied with your appliance has a fuse fitted and the
fuse fails it must be replaced with one of the same rating.
Note:
For non-rewireable Plug Type G the fuse cover MUST be refitted
when replacing the fuse. If the fuse cover is lost then the plug
must not be used until a replacement can be obtained. The
correct fuse cover is identified by colour and a replacement
may be obtained from your Kenwood Authorised Repairer (see
Service).
Plug Type G
This appliance conforms to EC Regulation 1935/2004 on
materials and articles intended to come into contact with food.
Key
Liquid Dripper
1
Chopper Lid
2
Finger Grip
3
Knife Blade
4
In Bowl Drive Shaft
5
Chopper Bowl
6
Grinding Mill Lid
7
Grinding Mill Blade
8
Assembly
Cord Storage
9
Power Unit
10
Pulse Button
11
On/Off Button
12
Folding Spatula
13
To Use Your
Chopper Bowl
Refer to Illustrations
IMPORTANT
Your Mini Chopper will not
operate unless the bowl and
lid are correctly interlocked.
To avoid overloading the
chopper and for best results,
do not fill the bowl above
the 500ml maximum level.
If preparing food for babies
or young children, always
check that the ingredients
are thoroughly processed
before feeding.
1 Place the power unit on a
clean, flat surface.
2 Fit the chopper bowl onto the
power unit, turn clockwise to
lock into place.
3 Fit the knife blade into the
bowl over the in bowl drive
shaft.
4
C H
–