Ablerex ARES PLUS-ECO 1K User Manual page 29

06: Bypass Setting
⚫
Display
⚫ 07: ECO MODE
Display
Value
Entity Bypass setting, this item it to set bypass output when
UPS is not on inverter output mode(line mode / battery
mode), if the setting is disable bypass output is turn OFF
when UPS is not on inverter output mode(line mode / battery
mode) , on the contrary, if the setting is enable , the bypass
output is turn ON when UPS is not on inverter output
mode(line mode / battery mode) if only mains input is
normal, please note the UPS should be turn on if the load
need to be protected by the UPS when this setting is enable.
ON： Enable bypass mode
OFF：Disable bypass mode
Use "UP Page" or "Down Page" Button to find desired
voltage value , then Use "ENTER" button to activate the
value, once the value is active, there is "OUT" icon shown
above the value
Example:
Value
Economic (ECO) Mode Enable /Disable setting
ON: Enable Economy (ECO) mode
OFF: Disable Economy (ECO) mode
Use "UP Page" or "Down Page" Button to find desired
voltage value, then Use "ENTER" button to activate the
value, once the value is active, there is "OUT" icon shown
above the value
Example:
29