Ablerex ARES PLUS-ECO 1K User Manual page 19

⚫
CHECK THE POLARITY of battery bank, fix wires of correct polarity to the battery bank with
proper color and clear label for distinguish the polarity.
⚫
Securely Plug / Fix the other end of the cable to UPS
⚫
Check the polarity of the wiring and fastness of the connection
⚫
Powered the UPS by turning on the cutoff device
⚫
This UPS may work with a maximum of 4 extension battery cabinets.
3.3.5 Communication Cable
RS232 : Connect UPS computer Interface (RS232) and monitor equipment through
communication cable.
Intelligent Card Slot is used to install NMC (Network Management Card), AS400 Card ,
CMC(Centralized Monitoring Card), to implement Network Monitoring, RS485 based ModBUS protocol
monitoring.
The USB port is a serial port emulator will allow you to create virtual RS232 ports linked via a
USB Port, the UPS could be managed through the same management software, while does not support
HID USB Power part operating mode.
The Product also provide optional Modbus Port, Relay Dry contact card, refer to optional port
user manual for application.
19