Transport; Storage; Note - Ablerex ARES PLUS-ECO 1K User Manual

100/110/120/125v online ups 1-3 kva
Hide thumbs Also See for ARES PLUS-ECO 1K:
Table of Contents

Advertisement

e) Disconnect charging source and load prior to installing or maintaining the battery.
f) Remove battery grounds during installation and maintenance to reduce likelihood of shock. Remove
the connection from ground if any part of the battery is determined to be grounded.
★ When changing batteries, replace with the same quantity and the same type of batteries.
★ Do not attempt to dispose of batteries in a fire. It could cause explosion.
★ Do not open or mutilate batteries. released electrolyte is harmful to the skin and eyes. It may be toxic.
★ Please replace the fuse only by a fuse of the same type and of the same amperage to avoid fire
hazards.
★ Do not dismantle the UPS, except the qualified maintenance
person.

1.4 Transport

★ Please transport the UPS only in the original packaging (to protect against shock and impact).

1.5 Storage

★ The UPS must be stockpiled in the room where it is ventilated and dry

NOTE:

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense
6

Advertisement

Table of Contents
loading

Table of Contents