Ablerex ARES PLUS-ECO 1K User Manual page 26

02: Output frequency
⚫
Display
⚫ 03: Auto turn on upon mains power on
Display
Value
Parameter Item: Output frequency
000: auto adaptive, the UPS will automatically detect the
mains frequency to determined it output frequency
when it wakes up by mains power on
050: Fixed 50Hz rated frequency
060: Fixed 60Hz rated frequency
Use "UP Page" or "Down Page" Button to find desired
voltage value , then Use "ENTER" button to activate the
value, once the value is active, there is "Hz" icon shown
behind the value
Example:
Value
Auto turn ON Function setting
ON： Enable auto turn on function, when the UPS wake by AC
mains apply , the UPS will automatically turn on and run in line
mode
OFF：Disable auto turn on function, the UPS will stay on
standby mode /bypass mode until manual turn on operation
Use "UP Page" or "Down Page" Button to find desired voltage
value, then Use "ENTER" button to activate the value, once the
value is active, there is "OUT" icon shown above the value
26