Table of Contents
Advertisement
Restart
RAID configuration – advanced
Set parameters
for multiple
arrays
Set system
parameters
LUN mapping
Restart
42
ACS-8990/89200/89230 User's Manual
Save settings and restart. Turn to Saving configurations.
Create several arrays. For each in turn set the following
individual parameters:
RAID level
Number of disks
Number and size of slices
Turn to Setting array parameters
Set the following parameters for the RAID system:
Striping block size
Write buffer (enable/disable)
Writing method (random / sequential)
Turn to Setting array parameters
Map each slice to a LUN
Users of the SCSI interface model should turn to Setting SCSI
parameters. Users of the fibre channel interface model should
turn to Setting fibre channel parameters.
Save settings and restart. Turn to Saving configurations.
Advertisement
Table of Contents
