Chapter 5 – Configuration
The alert fax header should be input in the Company Info submenu, located at Main menu >
System Params menu > Company Info
4
4.4 Company Info
System params
Company Info menu
4.4.1
String 1
Enter the first line of information to be used as the alert fax header (up to 16
alphanumeric characters).
4.4.2
String 2
Enter the second line of information to be used as the alert fax header (up to 16
alphanumeric characters).
Modem settings
Before the fax and pager alerts are used the default Modem Initialization string should be
confirmed or a new string entered. Do this in the Modem Init St submenu, located at Main
menu > System Params menu > Modem Init St
4
4.5 Modem Init St
System params
Modem Init St menu
4.5
Modem Init St
Configures the modem you are using for the remote notification feature.
4.4.1
String 1
4.4.2
String 2
When the above data has been entered appropriately, go to the NVRAM
submenu to update settings so that the configuration changes are saved.
The default string is a generic string compatible with most modems. Refer to
your modem user's guide to check if your modem requires a different string.
Configuration changes made in the System Params menu must be saved to the
ACS-8990 non-volatile memory for the changes to take effect. This is done in
the NVRAM menu accessed from the Main menu.. See Saving Configurations
later in this chapter.
63