Table of Contents
Advertisement
6.B
Update ROM
6.1
6.2
6.3
6.4
6.5
6.6
66
6.A.4 SMART
Init Parity
Select an Array and then Stop or Start (Default: Stop) to initialize an existing
RAID 5 or RAID 3 array
Initialization of an existing array will erase all data on the array.
Parity Check
Select an Array and then Stop or Start (Default: Stop) to check a RAID 5 or
RAID 3 array for errors.
Beeper
Clear (to silence a sounding beeper), Enable or Disable beeper function
(Default: Enable).
Stop Modem
No or Yes
Select Yes to halt the transmission of subsequent alert faxes / pager
messages when the message has been received and acknowledged
(Default: No).
Add Disk
Select disk number (1 to 16)
Add a disk to an existing configuration while ACS-8990 is online (Default:
None).
Remove Disk
ACS-8990/89200/89230 User's Manual
6.A.4.1 Test Disk SMART
6.A.4.2 SMART Mode
6.A.4.3 SMART Check
Time
6.A.4.4 Bad Blocks
Seleck disk number
Disable/Enable
(Alert
only)/Enable(Permenant
clone)/Enable(Start
Swap after Clone)
60 mins/30 mins/15
mins/1 min
6.A.4.4.1 View Statistics
6.A.4.4.2 Threshold for
Clone
6.A.4.4.3 Threshold for
Swap
Advertisement
Table of Contents
