Table of Contents
Advertisement
Chapter 5 – Configuration
Accessing the main menu using the control panel
ACS-8990-16 STD
××111×××××××××××
Enter Passwd:
00000000
Main menu
0 Quick Setup
1. Turn on ACS-8990. The controller will first
2. Press Enter to enter Configuration Mode.
The default password is 00000000 (eight zeros). The system administrator
should change this on first login. The password can be changed under the
System params menu. See Password Security.
3. You enter the main menu. Use the scroll
The main menu varies slightly depending on the hardware configuration of the
model purchased. The main menu of the fibre host interface configuration has
an FC (fibre channel) submenu. The main menu of the SCSI host interface
configuration has a SCSI params submenu. These submenus are dealt with
separately in this chapter.
enter Self-Diagnostic Mode and then enter
Operation Mode. A typical Operation Mode
screen is shown
You will be prompted to enter the
password.
The
default
00000000 (eight zeros). To enter this,
simply press Enter eight times. Press
Enter again to submit.
keys to highlight the names of submenus
and press Enter to select.
password
is
47
Advertisement
Table of Contents
