Acs-8990 Fc-To-Sata Package; What Else You Need - Accusys ACS-8990 User Manual

ACS-8990 FC-to-SATA package

ACS-8990 Controller Box ×1 with:
– ACS-8990 controller
– ACS-7145 daughter board
– ACS-5160 bridge board
– ACS-8961 Backplane
– Panel module
– 10 pin panel cable & LCD cable
ACS-8990 Controller User's Manual ×1
Serial ATA cable x 16
3-in-1 Combo Cable ×1
HSSDC2 to HSSDC2 cable (50cm) x 2
10-pin power cable x 1
Mounting screws (bag) ×1
GUI CD Drive ×1

What else you need

Serial ATA hard disk drives (different RAID levels requires different numbers of
HDDs. Turn to Appendix B to determine how many HDDs you require)
Disk array enclosure
SCSI cable (SCSI host interface only)
LC Fibre cable (fibre host interface only)
Small form-factor pluggable (SFP) cable (fibre host interface only)
DDR SODIMM memory module
Host adapters with SCSI interface (SCSI host interface only)
Host adapters with fibre interface (fibre host interface only)
External power connector (same type as for CDROM)
External terminator (SCSI host interface only)
Static grounding strap or electrostatic discharge (ESD) safe work area
Dedicated terminal or PC with third party communication software that supports
ANSI terminal emulation (required for viewing Monitor Utility)
16
ACS-8990/89200/89230 User's Manual
For non-proprietary accessories, such as memory modules, cables, etc., your
vendor may be able to recommend compatible and reliable brands.