Table of Contents
Advertisement
Chapter 2 – Installation
Removing / replacing control panel
To remove the control panel:
1. Release the two latches securing the
control panel to the controller box casing.
2. Ease the control panel forward out of the
controller box.
3. Release the two control panel cables from
the control panel.
To install the control panel:
1. Connect the two control panel cables to the control panel.
2. Slot the control panel into position, ensuring that the two latches lock the control panel
into position on the controller box casing.
Removing / replacing the daughterboard
To remove the daughterboard:
Lift the daughterboard gently but firmly to
disconnect it from the controller board
connectors.
To install the daughterboard:
Line the daughter board connectors up
with the controller board connectors and
press down firmly.
25
Advertisement
Table of Contents
