Appendix G – Statistics
Fibre information
Fibre information is listed separately for the primary fibre channel and secondary channel, if a
second channel is being used. The following data are shown. See Setting fibre parameters in
Chapter 5 for configuration details.
LUN map: ACS-8990 supports up to 16 logical units in total. Slices must be mapped to logical
units to be accessible by the operating system. The LUN map shows which slices map to
logical units. A typical readout may show:
LUN Map:
x x x x x x x x x x x x x x x x x x x x x x
x x x x x x x x x x x x x x x x x x x x x x)
In this case, five slices have been mapped. The operating system will be able to access each
of these as a distinct logical unit. Furthermore, the LUN map shows that the operating system
can access two separate arrays. Array 1 contains three logical units / mapped slices denoted
10, 11 and 12. Array two has two logical units / mapped slices, 20 and 21.
RS232 information
RS232 information applies to the modem and terminal connection. The following data are
shown. Refer to Setting port parameters in Chapter 5 for details.
Company information
Two company string numbers are listed. Refer to Company info menu in Fax alert settings in
Chapter 5 for details.
Fibre information is given only for controllers with a Fibre interface
daughterboard. Equivalent SCSI statistics are given for controllers with SCSI
daughterboards. See preceding section.
Hardloop ID
Mode
Data Rate
LUN map
(10 11 20 21 12 x x x x x x x
Baud Rate
Data Bit
Stop Bit
Parity
97