4.4.5.2 Port Setting
Storm control for the switch is configured on this page. There are three types of storm rate control:
Broadcast storm rate control
Unknown Multicast storm rate control
Unknown Unicast storm rate control
The configuration indicates the permitted packet rate for unknown unicast, unknown multicast, or broadcast traffic across the
switch. The Storm Control Configuration screens in
The page includes the following fields:
Object
Port
Port State
Action
Type Enable
Rate (kbps/pps)
Buttons
: Click to apply changes
Figure 4-4-25
Figure 4-4-25 Storm Control Setting Page Screenshot
Description
Select port for this drop down list.
Enable or disable the storm control status for the given storm type.
Configures the action performed when storm control is over rate on a port. Valid
values are Shutdown or Drop.
The settings in a particular row apply to the frame type listed here:
Broadcast
Unknown Multicast
Unknown Unicast
Configure the rate for the storm control. The default value is "10,000".
151
User's Manual of IXT-900 PoE series
&
Figure 4-4-26
appear.