Serial Port Configuration - Planet ICS-10 Series User Manual

4.5 Serial Port Configuration

The page shows the converter's serial Port configuration. T
The page includes the following fields:
 Mode
 Baudrate
 Character Bits
 Parity Type
 Stop Bit
 Hardware Flow Control
he screen in Figure 4-52 appears.
Figure 4-52 Serial Port Configuration page screen
From the drop-down menu, select the serial port mode:
RS-232

RS-422

RS-485

The unit and attached serial device, such as a modem, must agree on a speed or
baud rate to use for the serial connection, Valid baud rates.
It's in the range of 300bps to 921600bps.
Indicates the number of the bits in a transmi
is 5,6,7,8
The default is "8".
y type. The default value is "none".
Checks for the parit
The stop bit follows the data and parity bits in serial communication. It indicates
the end of transmission. The default is "1".
Flow control manages data flow between de
processed efficiently. Too much data arriving before a device is prepared to
manage it causes lost or retransmitted data. The default value is "none".
-52-
User's Manual of ICS-10x
tted data package. The allowed value
vices in a network to ensure it is