The page includes the following fields:
Object
System PoE Admin
Mode
PoE Management
Mode
Temperature
Threshold
Power Budget
1. When selecting different PoE management modes refer to the user manual for proper operation.
Check your power supply's output capability before modifying the value of Power Supply Budget [W]
2. When the input voltage is under 24V, it's advised to limit the load to a maximum of 60 Watts to
prevent excessive temperature increase.
Figure 4-7-2: PoE Configuration Screenshot
Description
Allows user to enable or disable PoE function. It will cause all of PoE ports to
supply or not to supply power.
There are six modes for configuring how the ports/PDs may reserve power and
when to shut down ports.
Consumption mode: The system offers PoE power according to PD real
power consumption.
Allocation mode: Users allow to assign how much PoE power to each port
and the system will reserve PoE power to PD.
Allows setting over temperature protection threshold value. If the system
temperature is overly high, the system will lower the total PoE power budget
automatically.
Configure PoE power output budget.
171
User's Manual of IXT-900 PoE series