4.3.3.3 LLDP Port Setting
Use the LLDP Port Setting to specify the message attributes for individual interfaces, including whether messages are
transmitted, received, or both transmitted and received. The LLDP Port Configuration and Status screens in
Figure 4-3-30
appear.
Figure 4-3-29 LLDP Port Configuration and Optional TLVs Selection Screenshot
The page includes the following fields:
Object
Port Select
State
Port Select
Optional TLV Select
Description
Select port from this drop-down list
Enables LLDP messages transmit and receive modes for LLDP Protocol Data
Units. Options:
Tx only
■
Rx only
■
TxRx
■
Disabled
■
Select port from this drop-down list
Configures the information included in the TLV field of advertised messages.
System Name: When checked the "System Name" is included in LLDP
information transmitted.
Port Description: When checked the "Port Description" is included in
LLDP information transmitted.
System Description: When checked the "System Description" is
included in LLDP information transmitted.
System Capability: When checked the "System Capability" is included
in LLDP information transmitted.
802.3 MAC-PHY: When checked the "802.3 MAC-PHY" is included in
123
User's Manual of IXT-900 PoE series
Figure 4-3-29
and