Vc-231 / Vc-234 Connect To Multi-Port Master - Planet vc-231 User Manual

3.1.2 VC-231 / VC-234 Connect to Multi-Port Master

In order, to built up a local Internet in apartment, hotel and
campus and hospitality environment.
The Multi-port Master (for example, VC-820M / VC-2400M VDSL2
Switch) need to be placed in the wiring center (MDF room) and
connect to the telephone line system, on the other hand, need
to install a Slave (VC-231 / VC-234 CPE) Converters / Bridge on
the individual client side and connect to the Multi-port Master
through the telephone lines.
When deciding where to put the converter then you must
ensure:
It is accessible and cables can be connected easily.
l
Cabling is away from sources of electrical noise such as
l
radios, transmitters and power lines and fluorescent lighting
fixtures.
Water or moisture can not enter the Converters / Bridge.
l
Air flow around the unit and through the vents in the side
l
of the case is not restricted (company recommend that you
provide a minimum of 25mm inch clearance).
To prolong the operational life of your units:
Do not place objects on top of any unit or stack.
l
22