Serial Port Configuration - Planet ICS-100 User Manual

7. Then the control keyboard cans remote control the IP camera.

4.5 Serial Port Configuration

The page shows the converter's serial Port configuration. The screen in Figure 4-52 appears.
The page include s the following fields:
• Mode
• Baudrate
• Character Bits
• Parity Type
• Stop Bit
Figure 4-52 Serial Port Configuration page screen
From the drop-down menu, select the serial port mode:
RS232
RS-422
RS-485
The unit and attached serial device, such as
baud rate to use for the serial connection, Valid
It's in the range of 300bps to 230400bps.
Indicates the number o
is 5,6,7,8
The default is "8".
Checks for the parity type. The default value is "none".
The stop bit follows the data and parity bits in serial communication. It indicates
-50-
a modem, must
baud rates.
f the bits in a transmitted data package. The allowed value
User's Manual of ICS-10x
agree on a speed or