Led Indications - Planet IXT-900-1X1UP User Manual

2.1.3 LED Indications

LED Definition:
 System and Power
LED Color
PWR 1/2 Green
Alarm Red
 PoE LED
LED Color
802.3bt
Green
PoE-in-Use
802.3at
Amber
PoE-in-Use
 Per 10GBASE-T RJ45 Interface
LED Color
1G/100 Green
10G Amber
2.5G/5G Green
 Per 10GBASE-X SFP+ Interface
LED Color
100/1G/2.5G
Green
LNK/ACT
10G
Amber
LNK/ACT
Lit Power ON
Off Power OFF
Illuminates red when a critical system fault is detected, such as a port failure or power supply issue.
Attention is required to diagnose and resolve the problem.
Lit PoE is active and providing power with the 802.3bt standard.
Off PoE is inactive.
Lit PoE is active and providing power with the 802.3at standard.
Off PoE is inactive.
Lit: To indicate the link through TP port is successfully established at 1Gbps or 100Mbps.
Blink To indicate that the switch is actively sending or receiving data over that port.
Lit: To indicate the link through TP port is successfully established at 10Gbps.
Blink To indicate that the switch is actively sending or receiving data over that port.
To indicate that the port is operating at 5Gbps or 2.5Gbps.
Lit:
Blink To indicate that the switch is actively sending or receiving data over that port.
Lit: To indicate the port is running at 1G/2.5Gbps and successfully established.
Blink To indicate that the Switch is actively sending or receiving data over that port.
Lit: To indicate the port is running at 10Gbps and successfully established.
Blink To indicate that the switch is actively sending or receiving data over that port.
User's Manual of IXT-900 PoE series
Function
Function
Function
Function
23