Table of Contents
Advertisement
3.3
Connect to Multi-Port Master
In order, to built up a local Internet in apartment, hotel,
campus and hospitality environment.
The Multi-port Master (for example, VC-412 or Cisco LRE
switch) need to be placed In the wiring center (MDF room)
and connect to the telephone line system, on the other hand,
need to install a Slave(VC-101S) converter on the individual
client side and connect to the Multi Port Master through the
telephone lines.
Multi-Port Master (VC-412)
When deciding where to put the converter then you must
ensure:
It is accessible and cables can be connected easily.
Cabling is away from sources of electrical noise such
as radios, transmitters and power lines and
fluorescent lighting fixtures.
Water or moisture can not enter the unit
Air flow around the unit and through the vents in the
side of the case is not restricted (company
recommend that you provide a minimum of 25mm
inch clearance)
To prolong the operational life of your units:
Do not place objects on top of any unit or stack
Do not obstruct any vents at the sides of the case
17
Advertisement
Table of Contents
