Table Of Contents - Emerson Rosemount 1066 Quick Start Manual

Single channel transmitter

Hide thumbs Also See for Rosemount 1066:

February 2024

WARNING

Electrostatic ignition hazard

Special conditions for safe use (when installed in hazardous areas)

The plastic enclosure, except the front panel, must only be cleaned with a damp cloth.

The surface resistivity of the non-metallic enclosure materials is greater than one

gigaohm. Take care to avoid electrostatic charge build-up. Do not rub or clean the

transmitter with solvents or a dry cloth.

The panel mount gasket has not been tested for type of protection IP66 or Class II and

III. Type of protection IP66 and Class II, III refer to the enclosure only.

Special condition of use of Rosemount 1066 C FF/FII5 and 1066 T FF/FII5. For use with

simple apparatus Rosemount 140, 141, 142, 150, 400, 401, 402, 402VP, 403, 403VP, 404,

and 410VP contacting conductivity sensors and Rosemount 222, 225, 226, and 228

toroidal sensors.

WARNING

Physical access

Unauthorized personnel may potentially cause significant damage to and/or

misconfiguration of end users' equipment. This could be intentional or unintentional and

needs to be protected against.

Physical security is an important part of any security program and fundamental in protecting

your system. Restrict physical access by unauthorized personnel to protect end users' assets.

This is true for all systems used within the facility.

Contents

Installation.................................................................................................................................... 5

Wiring.......................................................................................................................................... 17

Navigating the display...............................................................................................................28

Start up transmitter................................................................................................................... 33

Product certifications................................................................................................................ 35

Declaration of Conformity........................................................................................................ 40

China RoHS table........................................................................................................................42

Quick Start Guide