Emerson Rosemount 1066 Quick Start Manual page 29

February 2024
3.2 Instrument keypad
There are four function keys and four selection keys on the
instrument keypad.
Function keys
Four top-level menu items appear when you press MENU.
Calibrate
Hold
Program
Display
Press MENU to display the Main Menu screen. Press MENU followed
by EXIT to display the main display.
Pressing the DIAG key displays active faults and warnings and
provides detailed instrument information and sensor diagnostics,
including: faults, warnings, sensor information, Out 1 and Out 2,
the current values, model configuration string (e.g. 1066-P-Ht-60),
and instrument software version. Pressing DIAG on Sensor 1 or
Sensor 2 provides useful diagnostics and information (as applicable):
measurement, sensor type, raw signal value, cell constant, zero
offset, temperature, temperature offset, selected measurement
range, cable resistance, temperature sensor resistance, and software
version.
Press ENTER to store numbers and settings and move the display to
the next screen.
Press EXIT to return to the previous screen without storing changes.
Selection keys
Surrounding the ENTER key, four selection keys - Up, Down, Right,
and Left - move the cursor to all areas of the screen while using the
menus.
Selection keys are used to:
1. Select items on the menu screens.
2. Scroll up and down the menu lists.
3. Enter or edit numeric values.
4. Move the cursor to the right or left.
5. Select measurement units during operation.
Quick Start Guide
Calibrate the attached sensor(s) and analog output(s).
Suspend analog outputs.
Program outputs, measurements, temperature, and
security. You can also reset the transmitter.
Program display format, language, warnings, and
contrast.
Quick Start Guide
29